
Genuine AirTAC free mount cylinder, order code MU12X45 from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC MU12X45 is the plain double acting version of the Ø12 mm free mount series with a 45 mm stroke, ordered without the S option, so the piston carries no magnet and no position switch can be read from the body. The rod end keeps the standard female thread because B was not specified.
Even without sensing, the body keeps the series advantages: it bolts from any of its four sides, several units can be mounted side by side, and the locating boss on the front cover keeps the stroke start position accurate. The bore is hard-anodized against wear and the bidirectional piston seal holds 56.5 N push and 42.4 N pull at 0.5 MPa. Filtered air at 0.15-0.7 MPa feeds the M5x0.8 ports, the bumper cushion softens 30-500 mm/s travel, and the cylinder runs from -20 to +70 C with no lubrication.
| Order code | MU12X45 |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 45 mm |
| Magnet | No magnet |
| Rod end | Female thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Order MU12X45 when a 45 mm stroke is wanted and no position feedback is needed. Add S for the magnet version MU12X45S, or B for the male rod thread MU12X45B. For one step shorter or longer travel, MU12X40 and MU12X50 sit either side of this stroke on the same bore.
A 45 mm stroke on the Ø12 mm body raises light nests between two fixture levels, with the four-side body mounting fixing wherever the plate allows.
The female rod thread takes a simple folding horn, and 56.5 N push at 0.5 MPa closes small tabs or flaps at the end of each 45 mm move.
Where the PLC gets confirmation from a separate limit switch, this no-magnet code keeps the actuator simple while still delivering bumper-cushioned travel.
Ø12 mm bore, Ø6 mm rod, 45 mm stroke, double acting, no magnet, female rod thread. Push 56.5 N and pull 42.4 N at 0.5 MPa, port M5x0.8, operating pressure 0.15-0.7 MPa, proof pressure 1.2 MPa (175 psi), temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion, no lubrication required.
No. This code was ordered without the S option, so there is no magnet in the piston and a groove-mounted CMSH, DMSH or EMSH switch would never detect position. If feedback may be needed, order MU12X45S instead, which is the same 45 mm stroke cylinder with the magnet fitted.