
Genuine AirTAC free mount cylinder, order code MU12X45B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
This 45 mm stroke version of the AirTAC MU12 free mount cylinder pairs a Dia 12 mm bore with a male rod thread (the B option in the ordering code) and no magnet, so it stays simple where no position sensing is needed. Double acting on 0.15-0.7 MPa, it delivers 56.5 N push and 42.4 N pull at 0.5 MPa through M5x0.8 ports.
The square Dia 12 body fixes from any of its four sides and can sit side by side with other MU cylinders; a locating boss on the front cover aids accurate positioning, the bore is hard-anodized and the compact bidirectional piston seal runs without lubrication across -20 to +70 C.
| Order code | MU12X45B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 45 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Inside the MU12 stroke list, 45 mm sits one step below the 50 mm maximum and one above 40 mm; pick MU12X50B for full travel or MU12X40B for a shorter footprint. The B suffix chooses a male rod thread, so order plain MU12X45 instead if your tooling needs a female thread, and note that MUR12X45B is the axial-mounting variant while this body mounts transversely.
The B option gives a male rod thread, so nuts, clevises or linkages screw straight onto the Dia 6 rod without a female adapter - handy on small jig clamps and test rigs.
At 56.5 N push from the 12 mm bore at 0.5 MPa, this 45 mm stroke cylinder holds light parts during drilling, gluing or small assembly steps inside tight fixture bodies.
Because the square body mounts from four sides and cylinders stack side by side, several MU12X45B units can line up on one plate to sequence ejection or sorting moves.
Dia 12 mm bore with a Dia 6 mm rod, 45 mm standard stroke (tolerance +1.0/0 mm), double acting, 56.5 N push and 42.4 N pull at 0.5 MPa, M5x0.8 ports, 0.15-0.7 MPa operating range, 1.2 MPa (175 psi) proof pressure, 30-500 mm/s speed, -20 to +70 C, male rod thread, no magnet, bumper cushion.
No lubrication is required; supply air filtered by a 40 um element. This code has no magnet, so position sensing is not available on it - choose the S or SB versions for that. For mounting, the body's four-side fixing and locating boss mean no extra brackets are needed for the cylinder itself.