
Genuine AirTAC free mount cylinder, order code MU12X45SB from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
MU12X45SB stacks the two option letters on one cylinder: S fits the piston magnet for CMSH, DMSH or EMSH sensor switches, B swaps the rod end to a male thread. The result is a Dia 12 mm bore, 45 mm stroke free mount cylinder that can be position-monitored and hooked to external hardware at the same time.
Performance matches the rest of the MU12 family: double acting on 0.15-0.7 MPa air, 56.5 N push and 42.4 N pull at 0.5 MPa, M5x0.8 ports, 30-500 mm/s piston speed and a bumper cushion. The square body mounts from any of four sides, follows JIS standards and needs no lubrication.
| Order code | MU12X45SB |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 45 mm |
| Magnet | Magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
This code combines both options: S magnet plus B male thread. If your design has no sensing, take MU12X45B to keep it simple; if the mating part needs a female thread, order MU12X45S instead. Stroke-wise it sits between MU12X40SB and the 50 mm maximum MU12X50SB, and MUR12X45SB is the axial-mounting variant.
A magnet-equipped stopper with a male-threaded rod links to lever or roller linkages and reports extended or retracted position back to the line controller.
Pair the built-in magnet with a CMSH, DMSH or EMSH switch in the body groove so the PLC sees clamp state while the male rod thread drives the clamp pad.
45 mm stroke and 56.5 N push at 0.5 MPa let this cylinder nudge cartons or blisters between lanes; the male thread suits simple pusher plates.
S fits the position-sensing magnet that works with CMSH, DMSH or EMSH switches in the body grooves; B changes the rod end to a male thread for direct nut or clevis attachment; 45 is the standard stroke in mm, one step below the 50 mm maximum for this Dia 12 bore.
Yes. The magnet and the male thread are independent options, so a sensor can confirm rod position while the male Dia 6 mm rod thread carries a pusher plate or linkage. Key figures: 56.5 N push and 42.4 N pull at 0.5 MPa, 0.15-0.7 MPa air supply, M5x0.8 ports, -20 to +70 C.