verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MU12 · Free Mount Cylinder

Airtac MU Mini Free Mount Cylinder MU12X50B

Genuine AirTAC free mount cylinder, order code MU12X50B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke50 mm
  • MagnetNo magnet
  • Rod endMale thread
  • ActionDouble acting
  • Bore / rodØ12 / Ø6 mm
  • Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
$27.41 $34.91Save 21%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MU12 stroke, magnet and rod end on one page All MU12 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MU Mini Free Mount Cylinder MU12X50B

The AirTAC MU12X50B pairs the maximum 50 mm stroke of the Dia 12 free mount cylinder with a male rod thread, the option that the ordering code marks with the letter B. A male thread lets you pass a nut over the rod and clamp tooling, clevises or yokes against the rod shoulder instead of screwing into it, which is the usual choice for linkages and quick-change attachments. Behind the thread you still get the full double acting travel: 56.5 N push and 42.4 N pull at 0.5 MPa, bumper cushioning at both ends, and a stroke tolerance of +1.0/0 mm.

The square Dia 12 body fixes from any of its four sides and carries the grooves for CMSH, DMSH or EMSH sensors, but this particular code has no piston magnet, so those sensors cannot detect position until you order the magnetized MU12X50S. Air supply is 0.15-0.7 MPa through M5x0.8 ports, and the hard-anodized bore with its compact bidirectional seal runs without lubrication.

Airtac MU Mini Free Mount Cylinder MU12X50B Technical Specifications

Order codeMU12X50B
ProductFree Mount Cylinder
Stroke50 mm
MagnetNo magnet
Rod endMale thread
ActionDouble acting
Bore / rodØ12 / Ø6 mm
Standard strokes5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm)
Force at 0.5 MPaPush 56.5 N · pull 42.4 N
PortM5×0.8
FluidAir (filtered by 40 µm element)
Operating pressure0.15-0.7 MPa
Proof pressure1.2 MPa (175 psi)
Temperature-20 to +70 °C
Piston speed30-500 mm/s
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.

How to choose

MU12X50B is the male-thread choice at full 50 mm stroke; if you screw a stud directly into the rod, take the female-threaded MU12X50 instead, and for position sensing add the magnet as MU12X50S. Shorter strokes in the same male-thread style run from MU12X5B up to MU12X45B. All of these mount the body transversely; the axial-mounted R version is the alternative when the fixture needs a through-bolted body.

Applications

swap_horiz

Clevis and yoke linkages

The male rod thread takes a nut-secured clevis or yoke, letting the 50 mm stroke swing levers or toggle linkages without threaded tooling on the rod.

conveyor_belt

Quick-change pusher heads

On packaging and assembly lines, pusher plates clamp against the male thread with a nut, so heads can be swapped while keeping the full 50 mm stroke.

settings

Machine adjustments and gates

Use the long travel to index chutes, divert small parts or adjust stops, with 56.5 N push at 0.5 MPa and bumper cushioning protecting the mechanism.

FAQ

What are the key figures of the AirTAC MU12X50B?

Dia 12 mm bore with Dia 6 mm rod, 50 mm stroke with +1.0/0 mm tolerance, double acting, push 56.5 N and pull 42.4 N at 0.5 MPa, operating pressure 0.15-0.7 MPa, M5x0.8 port, bumper cushion, piston speed 30-500 mm/s, temperature -20 to +70 C, male rod thread (B), no magnet.

Why order MU12X50B instead of MU12X50?

The letter B in the ordering code specifies a male rod thread, so external nuts can clamp attached tooling against the rod; MU12X50 has a female thread that accepts a screwed-in stud instead. Neither code includes the piston magnet, so position sensing requires the MU12X50S variant; confirm exact thread dimensions from the datasheet.