
Genuine AirTAC free mount cylinder, order code MU12X5B from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC MU12X5B is the shortest-stroke, non-magnetic build of the Dia 12 mm MU free mount cylinder: the X5 code fixes 5 mm of travel, and the B code gives a male rod thread for direct screw-on tooling. Because no magnet option is selected, this cylinder carries no piston magnet and will not trigger CMSH, DMSH or EMSH groove sensors. It is double acting, fed through M5x0.8 ports with filtered air at 0.15-0.7 MPa.
The 5 mm stroke suits very short pushes and part presence moves where longer cylinders would waste space, and the compact bumper cushion handles piston speeds of 30-500 mm/s. At 0.5 MPa the cylinder produces 56.5 N push and 42.4 N pull, the hard-anodized bore resists wear, and the square body mounts from any of its four sides with the front-cover locating boss for accurate positioning.
| Order code | MU12X5B |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 5 mm |
| Magnet | No magnet |
| Rod end | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Choose MU12X5B when you need the shortest standard travel of the Dia 12 MU series with a male thread and no sensing. Order MU12X5 for the same 5 mm stroke with a female rod thread, MU12X5S if you do want the magnet for groove sensors, or MU12X10B to double the travel to 10 mm while keeping the male thread.
5 mm of travel is enough to seat or release small clamps, with 56.5 N push at 0.5 MPa holding the workpiece on a Dia 12 body.
With no magnet fitted, this build suits simple extend-and-return pushes where switch feedback is handled elsewhere on the machine.
The square Dia 12 body fixes from four sides and gangs side by side, letting short-stroke units pack tightly between other MU12 cylinders.
Dia 12 mm bore with Dia 6 mm rod, 5 mm standard stroke (tolerance +1.0/0 mm), double acting, no magnet, male rod thread, M5x0.8 ports, 0.15-0.7 MPa operating pressure, 1.2 MPa (175 psi) proof pressure, 56.5 N push and 42.4 N pull at 0.5 MPa, 30-500 mm/s speed, bumper cushion, -20 to +70 C.
This code is built without the magnet option, so CMSH, DMSH or EMSH groove switches will not detect the piston. If sensing is needed on a 5 mm stroke male-thread build, order the MU12X5S variant instead, which includes the magnet.