
Genuine AirTAC free mount cylinder, order code MU12X5S from the MU12 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The MU12X5S is the magnet-fitted, 5 mm-stroke version of the AirTAC MU12 free mount cylinder. Its square body can be bolted from any of four sides, and several units can sit side by side when panel space is tight. The rod end carries a female thread, the blank option in the MU ordering code, so standard female-threaded accessories screw on directly. Double-acting construction means air drives the rod out and returns it.
At 0.5 MPa the 12 mm bore and 6 mm rod deliver 56.5 N push and 42.4 N pull over the short 5 mm travel. The M5x0.8 ports accept 0.15-0.7 MPa filtered air, the bumper cushion softens both ends of travel, and the cylinder runs from -20 to +70 C at 30-500 mm/s without lubrication. A locating boss on the front cover holds positioning accurate, and body grooves accept CMSH, DMSH or EMSH sensors without brackets, letting the built-in magnet report rod position.
| Order code | MU12X5S |
|---|---|
| Product | Free Mount Cylinder |
| Stroke | 5 mm |
| Magnet | Magnet |
| Rod end | Female thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø12 / Ø6 mm |
| Standard strokes | 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 mm (max. 50 mm) |
| Force at 0.5 MPa | Push 56.5 N · pull 42.4 N |
| Port | M5×0.8 |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0498..P0499), MU series theoretical force, specifications, strokes and ordering code.
Pick MU12X5S when you need the shortest standard travel on a 12 mm bore plus position sensing. Skip the magnet with MU12X5 or the male-thread MU12X5B if no sensor is required; move to MU12X10S or longer when 5 mm of travel is too little. The female rod thread keeps accessory mounting simple; choose the B suffix for a male stud. Axial rather than transverse mounting is ordered as MUR12X5S.
The magnet and body grooves let a CMSH or EMSH sensor confirm rod retraction across the 5 mm stroke without any mounting brackets.
A 5 mm push of up to 56.5 N is enough to probe whether a small component is seated in a fixture before the next station cycles.
Fix the square body from any of its four sides and mount several cylinders side by side on compact jigs and test plates.
12 mm bore, 6 mm rod, 5 mm stroke, female rod thread, magnet fitted. Push force 56.5 N and pull 42.4 N at 0.5 MPa, operating pressure 0.15-0.7 MPa, port M5x0.8, piston speed 30-500 mm/s, temperature -20 to +70 C, bumper cushion, no lubrication required.
The body has sensor grooves sized for AirTAC CMSH, DMSH and EMSH switches, which clip on without brackets. The S in the order code means the piston magnet is present; without it, on MU12X5, no signal can be detected.