Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S
The AirTAC PBD Pen-shaped Double Rod Cylinder PBD16X80S is a double-acting pen-size mini cylinder with a piston rod protruding from both covers. The twin rods share one piston, giving equal push and pull force, resisting rotation and providing a spare mounting or sensing end on a Ø16mm bore, 80mm stroke.
- BoreØ16 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM10×1.0
- ForceEqual both ways
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S
The AirTAC PBD16X80S is a double-acting, double-rod pen-size mini cylinder featuring a 16 mm bore and 80 mm stroke. A piston rod protrudes from both covers, sharing one piston. Because both chambers act on the same rod-side annular area, push and pull forces are equal, delivering 90.7 N in both directions at 0.5 MPa. The built-in magnet enables position sensing.
Twin Ø5 mm stainless steel rods resist rotation better than a single rod and provide a spare end for a sensor flag, external stop, or second tool. The slim SUS304 body saves space in tight jigs, while a fixed TPU bumper at each end decelerates the piston near stroke limits. The M5x0.8 air port matches this bore size exactly.
Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S Technical Specifications
| Model | Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S |
|---|---|
| Series | PBD JIS pen-size double-rod cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm (both ends) |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Both chambers act on the rod-side annular area, so push and pull forces are equal. Piston rod and barrel are stainless steel. Confirm against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
Because a rod occupies both chambers, the effective area is identical on each side — push and pull forces match. Values are from the AirTAC thrust table (rod-side / pull column). Size with a friction margin.
Model Code: Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S
| PBD | JIS pen-size double-rod mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (single rod), PBJ (adjustable stroke), PBR (front-mount).
Where the Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S Is Used
Dual-Side Transfer
Moves parts simultaneously from both rod ends. Equal push and pull force ensures consistent motion whether pushing or pulling the load.
Sensor-Flagged Index
Uses the spare rod end to carry a physical flag for reed or electronic switches. The twin rods resist twist during indexing moves.
Symmetric Vertical Clamp
The double-rod design keeps the clamp body stable without drifting under symmetric loads.
Is the Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S the Right Cylinder?
This 16 mm bore generates 90.7 N of equal push and pull force at 0.5 MPa, sitting at the top of the PBD range. If your application requires less force, the 12 mm bore provides 46.7 N at 0.5 MPa.
Remember that both ends require rod clearance across the full 80 mm stroke. The thin Ø5 mm rod handles coaxial thrust well, but add an external linear guide for off-axis loads. When ordering, confirm the bore, stroke, S magnet for reed or electronic switches, and your preferred LB or FA mounting accessory.
Quick checklist
- ✓ Need equal force in both directions
- ✓ Second rod end for a sensor / stop / flag
- ✓ Better anti-rotation than a single rod
- ✓ Magnet (S) for sensors?
- ✓ Clearance for the rod on both ends
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Leave clearance for the rod at both ends.
- check Keep the load coaxial; avoid side load on the thin rods.
- check Do not dismantle the front or back cover.
- check Fit dust caps to ports during long-term storage.
Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S FAQ
The push and pull forces are equal because both chambers act on the same rod-side area. It generates 90.7 N at 0.5 MPa and 126.9 N at the maximum operating pressure of 0.7 MPa.
Yes, the spare rod end easily carries a sensor flag or external stop. The S suffix means a built-in magnet is present, allowing you to mount reed or electronic switches along the barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBD Pen-Size Cylinders
Request a Quote for Airtac PBD Pen-shaped Double Rod Cylinder PBD16X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.