Airtac RMH Magnetic Coupling Rodless Cylinder RMH10X200S
Genuine AirTAC magnetic rodless cylinder, order code RMH10X200S from the RMH range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- BoreØ10 mm
- Stroke200 mm
- Port threadM5×0.8
- ActionDouble acting, magnetic coupling
- GuideBuilt-in guide rail
- Ø10holding force 55 N · strokes to 300 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac RMH Magnetic Coupling Rodless Cylinder RMH10X200S
The RMH10X200S delivers 200 mm of slide travel, the longest stroke at which the catalog still lists the full Dia 10 load rating of 1.4 / 2.4 kg. A rodless body reaches this travel in far less space than a rod cylinder of the same stroke, and the sealed tube keeps the piston chamber isolated from the slide so dirt stays out.
Magnetic coupling carries 55 N of holding force, so keep the applied load force below that figure. Stroke tolerance at 200 mm is +1.0 / 0 mm, the M5x0.8 ports sit on one side, and the S option has the magnet fitted for CMSH, DMSH or EMSH switches. Fixed cushions with adjusting screws can be replaced by separately ordered hydraulic shock absorbers.
Airtac RMH Magnetic Coupling Rodless Cylinder RMH10X200S Technical Specifications
| Order code | RMH10X200S |
|---|---|
| Product | Magnetic Rodless Cylinder |
| Bore | Ø10 mm |
| Stroke | 200 mm |
| Port thread | M5×0.8 |
| Action | Double acting, magnetic coupling |
|---|---|
| Guide | Built-in guide rail |
| Ø10 | holding force 55 N · strokes to 300 mm |
| Ø16 | holding force 140 N · strokes to 500 mm |
| Ø20 | holding force 220 N · strokes to 800 mm |
| Ø25 | holding force 345 N · strokes to 800 mm |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.2-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Speed | 50-400 mm/s |
| Stroke tolerance | +1.0 / 0 mm (≤250), +1.5 / 0 mm (251-800) |
| Cushion | Fixed, adjusting screws |
| Sensors | CMSH, DMSH, EMSH |
| Port | M5×0.8 (Ø10, 16), PT1/8 (Ø20, 25) |
Source: AirTAC Products Catalog 2026A (PDF01-P0612..P0613), RMH series specifications, load tables, strokes and ordering code.
How to choose
RMH10X200S is the Dia 10 choice when 100 or 150 mm of the RMH10X100S and RMH10X150S falls short but the load still fits the 1.4 / 2.4 kg table that ends at 200 mm for this bore. Beyond that stroke or weight, the Dia 16 series with 140 N of holding force is the next step. Strokes over 250 mm change the tolerance to +1.5 / 0 mm, another reason to size at 200 mm when the layout allows.
Applications
Pusher and reject station
Sweep across roughly 200 mm of belt width to divert or reject parts, with the guide rail keeping the pusher face perpendicular under side load.
Assembly fixture positioning
Index components along a 200 mm slide where running accuracy matters, then hold position while an operation is performed.
Small vertical lift
Lift light carriers through 200 mm; keep the moving weight inside the 1.4 / 2.4 kg Dia 10 rating and below the 55 N coupling force.
FAQ
What are the key figures of the RMH10X200S?
Dia 10 mm bore, 200 mm stroke, double-acting magnetic coupling with built-in guide rail, M5x0.8 ports, 55 N holding force, 0.2-0.7 MPa operating pressure, 50-400 mm/s speed, -20 to +70 C, air filtered to 40 um, stroke tolerance +1.0 / 0 mm, S option with built-in magnet.
Why does the 200 mm stroke matter for load capacity?
The catalog lists 1.4 / 2.4 kg for the Dia 10 bore up to 200 mm stroke, and the allowed load falls on longer strokes, so this is the longest Dia 10 RMH that carries the full rating. At 200 mm the tolerance is still the tighter +1.0 / 0 mm, which only relaxes above 250 mm.