Airtac RMH Magnetic Coupling Rodless Cylinder RMH16X300S
Genuine AirTAC magnetic rodless cylinder, order code RMH16X300S from the RMH range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- BoreØ16 mm
- Stroke300 mm
- Port threadM5×0.8
- ActionDouble acting, magnetic coupling
- GuideBuilt-in guide rail
- Ø10holding force 55 N · strokes to 300 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac RMH Magnetic Coupling Rodless Cylinder RMH16X300S
AirTAC gives the RMH16X300S a Dia 16 mm bore, a 300 mm stroke and M5x0.8 ports. Magnetic coupling drives the slide with no rod, the piston chamber is isolated from the slide to keep dirt out, and the added guide rail raises running accuracy, anti-rotation accuracy and load capacity. Catalog holding force for Dia 16 is 140 N.
This stroke marks the end of the full-load case: the catalog allows 3 or 5 kg up to 300 mm, so at exactly 300 mm you still have the complete rated load. Above 250 mm the stroke tolerance widens to +1.5/0 mm. Operate it on air filtered to 40 um at 0.2-0.7 MPa and 50-400 mm/s from -20 to +70 C, with CMSH, DMSH or EMSH sensors in the groove.
Airtac RMH Magnetic Coupling Rodless Cylinder RMH16X300S Technical Specifications
| Order code | RMH16X300S |
|---|---|
| Product | Magnetic Rodless Cylinder |
| Bore | Ø16 mm |
| Stroke | 300 mm |
| Port thread | M5×0.8 |
| Action | Double acting, magnetic coupling |
|---|---|
| Guide | Built-in guide rail |
| Ø10 | holding force 55 N · strokes to 300 mm |
| Ø16 | holding force 140 N · strokes to 500 mm |
| Ø20 | holding force 220 N · strokes to 800 mm |
| Ø25 | holding force 345 N · strokes to 800 mm |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.2-0.7 MPa |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Speed | 50-400 mm/s |
| Stroke tolerance | +1.0 / 0 mm (≤250), +1.5 / 0 mm (251-800) |
| Cushion | Fixed, adjusting screws |
| Sensors | CMSH, DMSH, EMSH |
| Port | M5×0.8 (Ø10, 16), PT1/8 (Ø20, 25) |
Source: AirTAC Products Catalog 2026A (PDF01-P0612..P0613), RMH series specifications, load tables, strokes and ordering code.
How to choose
At 300 mm this is the longest Dia 16 stroke that keeps the full 3/5 kg load rating. Choose RMH16X300S over RMH16X250S only when that extra 50 mm matters and the wider +1.5/0 mm tolerance is acceptable. Compared with RMH16X350S, this code avoids the load derating that begins past 300 mm; if you need more travel or higher force, step to the Dia 20 RMH20 series with its PT1/8 ports and 220 N holding force.
Applications
Conveyor diverter actuation
Pushing or shifting diverters and stops on conveyor lines, where a 300 mm throw covers the full divergence with 140 N of coupling force.
Assembly-cell feed slides
Feeding components into fixtures at up to 400 mm/s on air filtered to a 40 um element, with sensor switches confirming each position.
Guided carry at full rating
Carrying up to 5 kg across 300 mm where the slide must not rotate, staying inside the envelope where the full load case still applies.
FAQ
What are the key figures of the RMH16X300S?
Dia 16 mm bore, 300 mm stroke, 140 N magnetic holding force, M5x0.8 ports, double acting with guide rail, 0.2-0.7 MPa operating pressure, 50-400 mm/s speed, -20 to +70 C, stroke tolerance +1.5/0 mm above 250 mm, and the full 3/5 kg load case valid to exactly 300 mm.
How does the 300 mm stroke affect loading?
The catalog permits 3 or 5 kg up to 300 mm for Dia 16, so this code sits at the last stroke with the full rating; beyond it the allowed load falls. Also keep the working force below the 140 N holding force, and check the 1.2 MPa (175 psi) proof pressure in the datasheet.