Airtac SAI160 Standard Cylinder SAI160BX130
The AirTAC SAI160 Standard Cylinder SAI160BX130 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160BX130
The AirTAC SAI160X130 is a double-acting ISO 15552 profile cylinder featuring a 160mm bore and 130mm stroke. It provides massive thrust, generating 14074N of push force at 0.7 MPa, making it well-suited for heavy-duty press operations. This specific configuration includes a SUS304 stainless steel piston rod for superior corrosion resistance and a PT tapered G3/4 port thread.
Because the barrel is an extruded aluminum profile rather than a tie-rod design, it offers a clean exterior with integrated sensor grooves on both sides. Note that without a magnet (-S option), electronic position sensing via CMSE or DMSE switches is not possible. For applications requiring position holding upon air loss, consider the SAIL locking variant or an external rod lock.
Airtac SAI160 Standard Cylinder SAI160BX130 Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160BX130 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160BX130
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160BX130 Is Used
Heavy Stamping
Generates 14074N of push force at 0.7 MPa, ideal for driving heavy metal stamping and forming presses.
Automotive Assembly
Provides the robust linear motion required to lift and position large chassis components during vehicle assembly.
Pallet Handling
Moves heavy loaded pallets on conveyors, utilizing the 160mm bore's high thrust capacity to overcome inertia.
Is the Airtac SAI160 Standard Cylinder SAI160BX130 the Right Cylinder?
Choosing this 160mm bore is appropriate when the 100mm bore (offering 5497N push at 0.7 MPa) is insufficient for your load. If you need even more force, the 200mm bore yields 21991N at the same pressure. At 130mm, the stroke is compact enough to avoid significant rod-bearing bending, but always ensure the load is guided to prevent side loads from damaging the piston seal.
As a true ISO 15552 cylinder, this model serves as a dimensionally interchangeable direct replacement for other ISO 15552 profile cylinders. To match this exact unit, specify a 160mm bore, 130mm stroke, PT G3/4 port, SUS304 rod material, and your preferred mounting accessory such as an LB foot or TC trunnion. A magnet is not included in this configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160BX130 FAQ
At 0.7 MPa, the SAI160X130 delivers a push force of 14074N and a pull force of 9425N. The theoretical maximum force at 1.0 MPa is 2050 kgf.
Yes, the SAI160X130 is a genuine ISO 15552 profile cylinder, meaning its mounting dimensions are interchangeable with other standard ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160BX130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.