Airtac SAI160 Standard Cylinder SAI160BX95S
The AirTAC SAI160 Standard Cylinder SAI160BX95S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 95mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke95 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI160 Standard Cylinder SAI160BX95S
The AirTAC SAI160X95-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a substantial push force of 14074 N at 0.7 MPa, making it well-suited for high-mass handling tasks within a compact 95 mm stroke. The extruded aluminum barrel design omits tie rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 cylinders.
Built to exacting specifications, this variant features a SUS304 stainless steel piston rod for superior corrosion resistance in harsh environments. It includes a magnet for CMSE/DMSE sensor integration along the dual side grooves, and utilizes PT tapered port threads. For elevated thermal demands, the standard TPU seals can be swapped for high-temperature Viton (H) components.
Airtac SAI160 Standard Cylinder SAI160BX95S Technical Specifications
| Model | Airtac SAI160 Standard Cylinder SAI160BX95S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI160 Standard Cylinder SAI160BX95S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI160 Standard Cylinder SAI160BX95S Is Used
Heavy Stamping
Provides the robust 10053 N thrust at 0.5 MPa needed to form and stamp thick metal components in automated fabrication cells.
Injection Molding Eject
Utilizes the SUS304 stainless rod and 95 mm stroke to reliably push heavy molded parts out of machinery exposed to residual heat.
Pallet Handling
Drives substantial lifting and positioning mechanisms in automated storage systems where high force and precise CMSE sensor feedback are critical.
Is the Airtac SAI160 Standard Cylinder SAI160BX95S the Right Cylinder?
Selecting this 160 mm bore cylinder is ideal when 100 mm or 125 mm models lack sufficient thrust—the 125 mm bore provides 8590 N push at 0.5 MPa, whereas this 160 mm unit yields 10053 N at the same pressure. Because the 95 mm stroke is relatively short, rod-bearing bending is minimal. However, if your application involves heavy lateral loads, consider a guided cylinder variant or external guide rails to prevent premature wear.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for standard ISO 15552 mounting interfaces. To complete your assembly, match the 160 mm bore, 95 mm stroke, PT G3/4 ports, and FA/FB flange or LB foot mounting accessories. Ensure you order the -S magnet option if position feedback is required. Note that if your machinery requires fail-safe load holding upon air loss, specify the SAIL or BSAI clamp-lock series instead of the standard SAI.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI160 Standard Cylinder SAI160BX95S FAQ
At an operating pressure of 0.7 MPa, this 160 mm bore cylinder generates a push force of 14074 N and a pull force of 9425 N. The maximum theoretical force at 1.0 MPa is 2050 kgf.
Yes, the SAI160X95-S is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It features a G3/4 PT port and standard mounting interfaces for easy direct replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI160 Standard Cylinder SAI160BX95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.