Airtac SAI200 Standard Cylinder SAI200AX195S
The AirTAC Airtac SAI200 Standard Cylinder SAI200AX195S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ200 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAI200 Standard Cylinder SAI200AX195S
The AirTAC SAI200X195-S is a double-acting ISO 15552 profile cylinder built for extreme force requirements, delivering a substantial 15708 N push force at 0.5 MPa. With a 200 mm bore and 195 mm stroke, this massive actuator is engineered to move heavy industrial loads. The extruded aluminum barrel design omits tie rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 cylinders.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for superior corrosion resistance in harsh environments. It is equipped with a magnet (-S) to trigger CMSE or DMSE electronic sensors via the integrated dual-side grooves. Fluid and air connections use PT tapered thread ports sized at G3/4.
Airtac SAI200 Standard Cylinder SAI200AX195S Technical Specifications
| Model | Airtac SAI200 Standard Cylinder SAI200AX195S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI200 Standard Cylinder SAI200AX195S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI200 Standard Cylinder SAI200AX195S Is Used
Heavy Metal Stamping
Provides the massive 21991 N push force at 0.7 MPa needed to operate large mechanical presses and form thick steel plates.
Large Injection Molding
Drives the heavy clamping units and core pulls on large-tonnage plastic injection molding machinery.
Automotive Assembly Jigs
Actuates heavy-duty lifting and positioning jigs for automotive chassis components, utilizing its SUS420J2 rod for durability.
Is the Airtac SAI200 Standard Cylinder SAI200AX195S the Right Cylinder?
Selecting this 200 mm bore cylinder is appropriate when applications exceed the 14074 N push force (at 0.5 MPa) of the smaller 160 mm variant. The 195 mm stroke provides substantial travel while staying well within the 1500 mm maximum standard limit. Because the stroke is under 300 mm, standard rod-bearing bending stress is minimal, though external guides should still be used to prevent side loading on the piston rod. This genuine AirTAC component ensures reliable ISO 15552 mounting interchangeability.
For applications requiring position holding without continuous air pressure, note that the standard adjustable air cushions only decelerate the piston at stroke ends and do not lock the load. If dead-load holding is required upon pressure loss, specify the SAIL variant with an air-released lock or the BSAI bidirectional clamp-lock cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI200 Standard Cylinder SAI200AX195S FAQ
At an operating pressure of 0.7 MPa, this 200 mm bore cylinder generates a push force of 21991 N and a pull force of 15080 N.
No, the standard SAI cylinder does not hold position when air pressure is lost. The adjustable air cushions only decelerate the piston near the stroke ends. For dead-load holding, use the SAIL (air-released lock) or BSAI (clamp-lock) variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI200 Standard Cylinder SAI200AX195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.