Airtac SAI200 Standard Cylinder SAI200AX260S
The AirTAC SAI200 Standard Cylinder SAI200AX260S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 260mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke260 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI200 Standard Cylinder SAI200AX260S
The AirTAC SAI200X260-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. It provides a substantial push force of 15708 N and a pull force of 15080 N at 0.5 MPa, making it well-suited for moving massive loads over a 260 mm stroke. The extruded aluminum barrel design omits tie rods for a clean exterior.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance. The -S suffix indicates a built-in magnet for position sensing, allowing seamless integration with CMSE or DMSE switches mounted directly into the dual sensor grooves. Fluid ports feature PT tapered threading, and the cylinder incorporates adjustable air cushions at both ends to absorb kinetic energy.
Airtac SAI200 Standard Cylinder SAI200AX260S Technical Specifications
| Model | Airtac SAI200 Standard Cylinder SAI200AX260S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI200 Standard Cylinder SAI200AX260S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI200 Standard Cylinder SAI200AX260S Is Used
Heavy Metal Forming
Provides the 15708 N push force required to actuate large stamping presses and heavy-gauge metal bending fixtures at 0.5 MPa.
Injection Mold Handling
Shifts substantial injection molding tooling safely, utilizing the SUS420J2 rod to resist moisture in humid factory environments.
Pallet Positioning
Indexes loaded pallets on high-capacity conveyor lines, relying on adjustable air cushions to stop the 200 mm bore smoothly.
Is the Airtac SAI200 Standard Cylinder SAI200AX260S the Right Cylinder?
Selecting this 200 mm bore unit is appropriate when application thrust requirements exceed the 10053 N push force of the 160 mm bore variant. Operating speed ranges from 30-500 mm/s. For this 260 mm stroke, the unsupported rod length is moderate, but mounting alignment remains critical to prevent premature rod seal wear. Utilize FA or FB flange accessories to maintain strict perpendicularity.
Because this is a standard double-acting cylinder, it will not maintain its position if air pressure drops. The adjustable end cushions decelerate the piston but do not act as a mechanical brake. If the machinery requires fail-safe load holding, consider the BSAI bidirectional clamp-lock variant or install an external pilot-operated check valve. This model serves as a direct dimensional direct for any ISO 15552 profile cylinder footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI200 Standard Cylinder SAI200AX260S FAQ
At an operating pressure of 0.5 MPa, this 200 mm bore cylinder generates a push force of 15708 N and a pull force of 15080 N. At 0.7 MPa, the push force increases to 21991 N.
Yes, the SAI200X260-S is dimensionally interchangeable per ISO 15552. You can drop it into existing mountings matching the standard 200 mm bore profile footprint without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI200 Standard Cylinder SAI200AX260S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.