Airtac SAI200 Standard Cylinder SAI200AX350S
The AirTAC SAI200 Standard Cylinder SAI200AX350S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI200 Standard Cylinder SAI200AX350S
The AirTAC SAI200X350-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. It provides 15708 N push force at 0.5 MPa and 21991 N at 0.7 MPa, making it a robust choice for high-thrust linear motion. The 350 mm stroke is ideal for moving large masses or executing long-travel clamping operations.
This variant features a SUS420J2 stainless steel piston rod for superior corrosion resistance and includes a magnet for proximity sensing. The extruded aluminum barrel incorporates sensor grooves on both sides, allowing seamless mounting of CMSE or DMSE switches without additional brackets.
Airtac SAI200 Standard Cylinder SAI200AX350S Technical Specifications
| Model | Airtac SAI200 Standard Cylinder SAI200AX350S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI200 Standard Cylinder SAI200AX350S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI200 Standard Cylinder SAI200AX350S Is Used
Heavy Metal Stamping
Provides the immense 15708 N push force required to form thick steel plates and operate massive press dies.
Large Press Transfer
Executes the 350 mm stroke needed to move heavy automotive chassis components between stamping stations reliably.
Industrial Waste Baling
Drives the heavy compaction ram in large-scale recycling facilities, utilizing its 21991 N force at 0.7 MPa.
Is the Airtac SAI200 Standard Cylinder SAI200AX350S the Right Cylinder?
Select this 200 mm bore when the 160 mm class (10053 N at 0.5 MPa) lacks sufficient thrust for your heaviest loads. For this 350 mm stroke, be mindful of side-load forces; long unsupported rods can bend under lateral stress. Use external guide rails or a fully guided cylinder to prevent rod-bearing wear and ensure smooth operation.
This unit uses a PT tapered G3/4 port and a standard ISO 15552 mounting interface, making it a direct replacement for other ISO 15552 profile cylinders. It includes a magnet (-S) for sensors. If the machinery must hold a load vertically without continuous air pressure, the cushion will not act as a brake; instead, integrate the SAIL locking variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI200 Standard Cylinder SAI200AX350S FAQ
This 200 mm bore cylinder generates a push force of 15708 N at 0.5 MPa and 21991 N at 0.7 MPa. The theoretical maximum force at 1.0 MPa is 3204 kgf.
Yes, the SAI200X350-S is dimensionally interchangeable per ISO 15552. It uses a standard mounting interface and a G3/4 port, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI200 Standard Cylinder SAI200AX350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.