Airtac SAI40 Standard Air Cylinder SAI40AX150
The AirTAC SAI40 Standard Air Cylinder SAI40AX150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke150 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX150
The AirTAC SAI40X150 is a double-acting ISO 15552 profile cylinder engineered to deliver 628N of push force at 0.5 MPa. Its 150mm stroke provides the precise mid-range travel needed for general automation tasks. The extruded aluminum barrel design integrates seamlessly with existing ISO 15552 mounting interfaces.
This specific configuration features a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads and lacks a magnet, meaning it is optimized for pure pneumatic actuation without requiring internal position sensing.
Airtac SAI40 Standard Air Cylinder SAI40AX150 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX150 Is Used
Parts Ejection
Uses the 150mm stroke to push finished metal parts out of a machining center, relying on the 628N force to clear heavy chips.
Package Sorting
Actuates a routing arm on a packaging line, deflecting cartons to secondary lanes with consistent mid-range thrust.
Clamp Actuation
Drives a pneumatic clamping mechanism to hold workpieces securely during light assembly or welding operations.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX150 the Right Cylinder?
When sizing this actuator, consider the neighboring bores: the SAI32 bore offers 402N push force at 0.5 MPa for lighter duties, while the SAI50 steps up to 982N for heavier cycles. To replace this unit, match the 40mm bore, 150mm stroke, PT G1/4 port, and the appropriate mounting accessory like an FA flange. Because no magnet is specified, position feedback requires external sensors.
If your mechanism must maintain its position during a complete air loss, remember that standard adjustable air cushions only decelerate the piston at stroke end. For true load holding, you must integrate an external pilot-operated check valve or transition to the SAIL locking variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX150 FAQ
The SAI40X150 generates 628N of push force and 528N of pull force at a 0.5 MPa operating pressure. At 0.7 MPa, the push force increases to 879N.
Yes, the SAI40X150 is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders, matching the 40mm bore, 150mm stroke, and G1/4 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.