Airtac SAI40 Standard Air Cylinder SAI40AX225
The AirTAC SAI40 Standard Air Cylinder SAI40AX225 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 225mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke225 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX225
The AirTAC SAI40X225 is a double-acting ISO 15552 profile cylinder offering a practical linear motion solution. It provides 628 N push force and 528 N pull force at 0.5 MPa, making it well-suited for medium-duty handling tasks. The 225 mm stroke gives extended travel for packaging and sorting equipment.
This variant features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, allowing direct mounting of CMSE or DMSE switches if a magnet is added later. Threaded PT ports and adjustable air cushions at both ends ensure quiet and controlled end-of-stroke deceleration.
Airtac SAI40 Standard Air Cylinder SAI40AX225 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX225 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX225
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX225 Is Used
Packaging Equipment
Provides the 628 N push force and 225 mm travel needed to extend and retract sealing jaws on automated flow-wrapping machines.
Sorting Diverters
Drives linear diverters to push products of varying weights off high-speed conveyor belts with reliable double-acting power.
Material Handling
Handles the vertical lifting and horizontal transfer of medium-weight component trays between adjacent workstations.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX225 the Right Cylinder?
If your application requires less force, stepping down to the SAI32 bore provides 402 N push force at 0.5 MPa, while moving up to the SAI50 bore yields 982 N. Because the 225 mm stroke exceeds 300 mm is not the case here, but at longer lengths you must manage side loading; for this 225 mm stroke, ensure adequate rod bearing support to prevent bending under lateral loads. The adjustable cushions help absorb kinetic energy at the stroke ends. Remember that a standard SAI cylinder does not hold its load when air pressure is removed; for position holding without live pressure, consider the SAIL locking variant or an external pilot check valve. This model serves as a dimensionally interchangeable direct replacement for other ISO 15552 profile cylinders, utilizing a G1/4 port, M12x1.25 rod thread, and compatibility with FA/FB flanges or LB foot mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX225 FAQ
At 0.5 MPa operating pressure, the SAI40X225 generates 628 N of push force and 528 N of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf of theoretical force.
Yes, the SAI40X225 is a genuine ISO 15552 profile cylinder. It is dimensionally interchangeable with other ISO 15552 cylinders, featuring a standardized mounting interface, G1/4 PT ports, and an M12x1.25 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.