Airtac SAI40 Standard Air Cylinder SAI40AX375
The AirTAC SAI40 Standard Air Cylinder SAI40AX375 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke375 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX375
The AirTAC SAI40X375 is a double-acting ISO 15552 profile cylinder engineered for standardized machine integration. It provides 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa, making it well-suited for 375 mm travel mid-range actuation tasks.
This specific configuration features a SUS420J2 stainless steel piston rod (option A) for enhanced corrosion resistance in humid or mildly chemically washed environments. It utilizes PT tapered port threads and lacks a piston magnet, meaning position detection requires external proximity switches rather than internal reed or solid-state sensors.
Airtac SAI40 Standard Air Cylinder SAI40AX375 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX375 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX375
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX375 Is Used
Package Diverting
Handles 375 mm linear travel to push cartons between adjacent conveyor lanes in packaging lines.
Component Feeding
Advances blanks or sub-components into machining centers with reliable 628 N push force at 0.5 MPa.
Pallet Stopping
Acts as a pneumatic stop gate for pallets accumulating at processing stations.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX375 the Right Cylinder?
Selecting this 40 mm bore over the smaller 32 mm variant upgrades your 0.5 MPa push thrust from 402 N to 628 N, while stepping up to the 50 mm bore yields 982 N if higher clamping pressure is required. The 375 mm stroke is a standard length but requires careful mechanical planning.
Because the stroke is 375 mm, the extended rod is highly susceptible to bending under side loads. Always use an external guide rail or a fully guided cylinder to prevent premature rod-bearing wear. This standard SAI does not hold its load upon air loss; if the application requires dead-stop holding without live pressure, specify the SAIL (pneumatic lock) or BSAI (clamp-lock) variant. Being a true ISO 15552 profile barrel, it mounts dimensionally interchangeably with other ISO 15552 cylinders using FA/FB flanges or LB foot brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX375 FAQ
The cylinder generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N.
Yes. As a genuine ISO 15552 profile cylinder, its mounting dimensions and PT G1/4 ports are fully interchangeable with other standard ISO 15552 cylinders of the same bore size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX375
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.