Airtac SAI40 Standard Air Cylinder SAI40AX475
The AirTAC SAI40 Standard Air Cylinder SAI40AX475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke475 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX475
The AirTAC SAI40X475 is a double-acting ISO 15552 profile cylinder featuring a 40mm bore and 475mm stroke. It delivers 628N of push force at 0.5 MPa, extending to 879N at 0.7 MPa, making it well-suited for mid-range linear actuation tasks across automated lines.
This unit is configured with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads and, because no magnet is specified, does not include the -S sensor groove option.
Airtac SAI40 Standard Air Cylinder SAI40AX475 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX475
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX475 Is Used
Material Transfer
Drives 475mm stroke pushers on packaging lines to transfer products between conveyor belts.
Component Indexing
Moves lightweight jigs into machining centers using the 879N force available at 0.7 MPa.
Carton Sorting
Actuates 40mm bore diverter arms on logistics sortation tracks for high-speed routing.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX475 the Right Cylinder?
When sizing this actuator, stepping up to the 50mm bore yields 982N of push force at 0.5 MPa, while dropping to the 32mm bore reduces it to 402N. Because this 475mm stroke creates a long unsupported rod extension, external guides are strongly recommended to prevent rod-bearing bending under any side load. A guided cylinder should be used if the load cannot be kept perfectly inline.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. It uses a G1/4 port, accepts standard mounting accessories like FA/FB flanges, and relies on adjustable air cushions at both ends to decelerate the piston. Note that air cushions do not hold loads; if position holding is required without live pressure, consider the SAIL or BSAI variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX475 FAQ
The SAI40X475 provides 628N of push force and 528N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879N.
Yes, the SAI40X475 is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting interfaces and can act as a direct replacement for other standard profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.