Airtac SAI40 Standard Air Cylinder SAI40AX600
The AirTAC SAI40 Standard Air Cylinder SAI40AX600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke600 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI40 Standard Air Cylinder SAI40AX600
The AirTAC SAI40X600 is a double-acting ISO 15552 profile cylinder engineered to deliver 879N of push force at 0.7 MPa across a 600mm stroke. Its extruded aluminum barrel eliminates tie-rods, providing a smooth, standardized mounting interface that drops directly into ISO 15552 machinery layouts.
Built for demanding environments, this specific configuration features a SUS420J2 stainless steel piston rod (material code A) for superior corrosion resistance compared to standard carbon steel. It utilizes PT tapered port threads and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported without modification.
Airtac SAI40 Standard Air Cylinder SAI40AX600 Technical Specifications
| Model | Airtac SAI40 Standard Air Cylinder SAI40AX600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI40 Standard Air Cylinder SAI40AX600
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI40 Standard Air Cylinder SAI40AX600 Is Used
Material Transfer
Drives 600mm linear pushes on packaging conveyors, utilizing its 879N force at 0.7 MPa to index products into sealing stations.
Component Indexing
Moves lightweight jigs along machining centers, relying on the SUS420J2 rod to resist moisture in washdown areas.
Assembly Line Actuation
Actuates 600mm travel gates and diverters on automated assembly lines where ISO 15552 mounting dimensions are required.
Is the Airtac SAI40 Standard Air Cylinder SAI40AX600 the Right Cylinder?
Selecting this 40mm bore makes sense when 628N at 0.5 MPa is sufficient for your load, but you need the extended 600mm travel. If your application requires less force, stepping down to a 32mm bore yields 402N at 0.5 MPa, while moving up to a 50mm bore provides 982N at 0.5 MPa for heavier pushing.
Because this stroke reaches 600mm, the unsupported piston rod is highly susceptible to bending under side loads. You must use an external guide rail or a fully guided cylinder to prevent rod-bearing damage. Additionally, the adjustable air cushions at both ends only decelerate the piston near stroke end; they will not hold a load vertically if air pressure drops. For secure position holding without live pressure, specify the SAIL locking variant or an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI40 Standard Air Cylinder SAI40AX600 FAQ
The SAI40X600 generates a push force of 879N at 0.7 MPa and 1130N at 0.9 MPa. It operates efficiently at speeds between 30 and 800 mm/s.
Yes, the SAI40X600 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing ISO 15552 mounting footprints and use standard PT G1/4 port connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI40 Standard Air Cylinder SAI40AX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.