Airtac SAI50 Standard Cylinder SAI50X300H
The AirTAC SAI50 Standard Cylinder SAI50X300H is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 300mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke300 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI50 Standard Cylinder SAI50X300H
The AirTAC SAI50X300 is a double-acting ISO 15552 profile cylinder built for rigorous automation tasks. It delivers a push force of 982 N at 0.5 MPa, making it well-suited for medium-duty handling across a 300 mm travel distance. The extruded aluminum barrel omits tie-rods for a clean, modern aesthetic while maintaining strict dimensional interchangeability with other ISO 15552 cylinders.
To survive thermally demanding environments, this specific configuration utilizes Viton (FKM) seals instead of standard TPU. This expands the operating temperature range beyond the standard -20 to +70 C, ensuring reliable operation in elevated ambient heat. The standard carbon steel piston rod provides robust resistance against industrial wear and tear.
Airtac SAI50 Standard Cylinder SAI50X300H Technical Specifications
| Model | Airtac SAI50 Standard Cylinder SAI50X300H |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI50 Standard Cylinder SAI50X300H
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI50 Standard Cylinder SAI50X300H Is Used
Material Transfer
Ideal for pushing or lifting packages along a 300 mm stroke length on high-speed sorting lines.
Assembly Pressing
Provides consistent 982 N force at 0.5 MPa for seating bearings and pins in automated assembly fixtures.
Pallet Positioning
Handles the indexing and stopping of pallets in hot environments thanks to its high-temp Viton seals.
Is the Airtac SAI50 Standard Cylinder SAI50X300H the Right Cylinder?
If your application requires slightly less push force, stepping down to the 40 mm bore yields 628 N at 0.5 MPa. Conversely, moving up to the 63 mm bore provides 1559 N for heavier payloads. Because this model features a 300 mm stroke, side loads can induce significant bending stress on the rod bearing. For optimal longevity, utilize an external guide rail or select a guided cylinder to prevent rod deflection. The PT tapered port thread ensures a tight, leak-free pneumatic connection. Remember that a standard SAI will drift if air pressure is lost; if your process demands fail-safe load holding, consider the SAIL variant with an air-released lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI50 Standard Cylinder SAI50X300H FAQ
At 0.5 MPa, the push force is 982 N, increasing to 1374 N at 0.7 MPa and 1767 N at 0.9 MPa.
Yes, the SAI50X300 is dimensionally interchangeable per ISO 15552, allowing it to serve as a direct replacement for other standard profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI50 Standard Cylinder SAI50X300H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.