Airtac SAI50 Standard Cylinder SAI50X60
The AirTAC SAI50 Standard Cylinder SAI50X60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI50 Standard Cylinder SAI50X60
The AirTAC SAI50X60 is a double-acting ISO 15552 profile cylinder featuring a 50mm bore and a 60mm stroke. It delivers a robust push force of 982 N at 0.5 MPa, making it well-suited for short, high-impact clamping and ejection tasks. The extruded aluminum barrel design omits tie rods, providing a clean exterior while maintaining strict dimensional interchangeability with other ISO 15552 cylinders.
This specific configuration is built with a standard carbon steel piston rod and utilizes PT tapered port threads (G1/4) for reliable pneumatic sealing. Because it lacks the -S magnet option, it is optimized for pure mechanical actuation rather than direct position sensing, though the barrel retains dual-side sensor grooves should your application later require reed switches.
Airtac SAI50 Standard Cylinder SAI50X60 Technical Specifications
| Model | Airtac SAI50 Standard Cylinder SAI50X60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI50 Standard Cylinder SAI50X60
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI50 Standard Cylinder SAI50X60 Is Used
Short-Stroke Clamping
Ideal for holding metal or composite parts firmly in place during machining, drilling, or welding operations.
Package Ejection
Provides the rapid 60mm punch needed to push sorted cartons or products off a high-speed conveyor belt.
Gate Diverter
Actuates short diverter gates on packaging lines to route products into different processing lanes.
Is the Airtac SAI50 Standard Cylinder SAI50X60 the Right Cylinder?
Selecting this 50mm bore is ideal when a 40mm bore (offering 628 N at 0.5 MPa) is insufficient for your load, but a 63mm bore (providing 1559 N) would be overkill and waste valuable space. The 60mm stroke provides quick, short linear movement. For this standard stroke length, side-load stress on the rod bearing is minimal, meaning external guides are usually unnecessary unless the load is heavily offset.
As a standard double-acting cylinder, the SAI50X60 relies entirely on continuous air pressure to hold its position. If your application requires the load to remain fixed during an emergency air-loss event, you must integrate an external pilot-operated check valve or transition to the AirTAC SAIL (air-released lock) variant. To ensure seamless ISO 15552 direct replacement, verify your mounting accessory (such as an LB foot or FA flange) and confirm the G1/4 port matches your existing air lines.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI50 Standard Cylinder SAI50X60 FAQ
At 0.5 MPa, this 50mm bore cylinder provides a push force of 982 N and a pull force of 825 N. If you increase the operating pressure to 0.7 MPa, the push force rises to 1374 N.
Yes, the SAI50X60 is a true ISO 15552 profile cylinder, making its mounting interface dimensionally interchangeable with other standard ISO 15552 cylinders. Just ensure your existing setup matches the G1/4 port and standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI50 Standard Cylinder SAI50X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.