Airtac SAI63 Standard Cylinder SAI63AX950S
The AirTAC SAI63 Standard Cylinder SAI63AX950S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke950 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI63 Standard Cylinder SAI63AX950S
The AirTAC SAI63X950-S is a double-acting ISO 15552 profile cylinder engineered for demanding linear motion tasks. Delivering a push force of 1559 N at 0.5 MPa, this non-standard 950 mm stroke variant is built to order for applications requiring extensive travel. The extruded aluminum barrel design omits tie-rods, providing a smooth exterior that simplifies mounting and cleaning.
This specific configuration includes a SUS420J2 stainless steel piston rod (material code A) for enhanced corrosion resistance in harsh environments. It is equipped with a magnet for use with CMSE and DMSE sensor switches, which seat neatly into the dual sensor grooves machined into both sides of the barrel. Threaded PT ports ensure a secure, tapered pneumatic connection.
Airtac SAI63 Standard Cylinder SAI63AX950S Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63AX950S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63AX950S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63AX950S Is Used
Extended Stroke Forming
Drives long-stroke pressing or forming operations where 1559 N of push force and 950 mm of travel are required to reach deep into machinery.
Material Transfer
Actuates large pusher plates across wide conveyor belts, utilizing the 950 mm stroke to transfer heavy components between parallel processing lines.
Automated Assembly
Indexs pallets or tooling carriages over long distances in automated assembly cells, relying on the ISO 15552 mounting interface for seamless integration.
Is the Airtac SAI63 Standard Cylinder SAI63AX950S the Right Cylinder?
Selecting this 63 mm bore over the smaller 50 mm bore increases your 0.5 MPa push thrust from 982 N to 1559 N, while stepping up to the 80 mm bore yields 2513 N if your load demands further scaling. Because this model features a 950 mm stroke, which exceeds the 1500 mm maximum standard stroke for this bore, it is manufactured as a non-standard made-to-order unit.
At 950 mm of travel, the extended rod is highly susceptible to bending under side loads. To prevent premature rod-bearing wear and piston drift, implement an external guide rail or utilize a fully guided cylinder to absorb lateral forces. Note that the adjustable air cushions at both ends decelerate the piston near stroke end but do not lock the load; if position holding is required without live air pressure, consider the SAIL or BSAI locking variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63AX950S FAQ
This 63 mm bore cylinder generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N.
Yes, the SAI series is dimensionally interchangeable per ISO 15552. You can drop it into existing setups utilizing standard FA, FB, LB, or TC mounting accessories without modifying the footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63AX950S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.