Airtac SAI63 Standard Cylinder SAI63BX475
The AirTAC SAI63 Standard Cylinder SAI63BX475 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 475mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke475 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI63 Standard Cylinder SAI63BX475
The AirTAC SAI63X475 is a double-acting ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. With a 475 mm stroke, it is tailored for automated machinery requiring substantial reach and reliable linear motion. The extruded aluminum barrel design omits tie rods, providing a clean exterior that resists mechanical debris buildup.
This specific configuration features a SUS304 stainless steel rod for superior corrosion resistance in harsh or washdown environments. It utilizes PT tapered port threads and lacks a piston magnet, meaning it is optimized for pure mechanical actuation rather than electronic position sensing.
Airtac SAI63 Standard Cylinder SAI63BX475 Technical Specifications
| Model | Airtac SAI63 Standard Cylinder SAI63BX475 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI63 Standard Cylinder SAI63BX475
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI63 Standard Cylinder SAI63BX475 Is Used
Material Handling
Drives extended pushers or diverter arms over long 475 mm cycles on packaging and sorting lines.
Automated Assembly
Actuates large jigs or clamping fixtures where a 1559 N force at 0.5 MPa is required to seat components.
Woodworking Machinery
Moves cutting heads or press blocks through lengthy strokes, leveraging the SUS304 rod to resist dusty and humid environments.
Is the Airtac SAI63 Standard Cylinder SAI63BX475 the Right Cylinder?
Stepping up to the 80 mm bore yields 2513 N at 0.5 MPa if your application demands higher thrust, while dropping to a 50 mm bore reduces force to 982 N for lighter payloads. At 475 mm of stroke, the unsupported rod is highly susceptible to bending under side loads. To prevent premature rod-bearing wear, implement an external guide rail or use a dedicated guided cylinder.
This model mounts via standard ISO 15552 interfaces and accepts accessories like FA flanges or TC trunnions. Remember that the adjustable air cushions only decelerate the piston near stroke ends; they do not lock the load. If your process requires position holding without live air pressure, select the SAIL variant with an air-released lock or use an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI63 Standard Cylinder SAI63BX475 FAQ
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N.
Yes, the SAI63X475 is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders with identical mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI63 Standard Cylinder SAI63BX475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.