Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX105-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 105mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke105 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10
The AirTAC SAIJ160X105-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window down to 95-105 mm without adding external stops. This configuration includes a SUS304 stainless steel rod for superior corrosion resistance and features a PT tapered port thread.
Unlike a fixed-stroke SAI, this adjustable variant lets you dial in the exact end-of-stroke position during machine commissioning or product changeovers. The rear adjuster functions strictly as a travel stop that works alongside the 50 mm air cushions to decelerate the load; it does not hold the load without live air pressure. For position holding, a SAIL or BSAI lock cylinder is required.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10 Is Used
Machine Setup Tuning
Dial in the exact 95 to 105 mm travel window during initial commissioning without swapping out the entire cylinder.
Product Changeover
Quickly adjust the retract end-stop on automated lines when transitioning to different product sizes or thicknesses.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10 the Right Cylinder?
The adjustable stroke is ideal for setups requiring variable end-stops or precise end-position tuning at commissioning. To replace an ISO 15552 cylinder, match the 160 mm bore, 105 mm stroke, 10 mm adjustment, PT G3/4 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. The 40 mm rod and M36x2 thread handle high side loads, but because the stroke is over 100 mm, ensure an external guide supports long unsupported loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10 FAQ
The rear adjuster acts as a mechanical stop, allowing you to trim the 105 mm nominal stroke back by up to 10 mm, creating a 95-105 mm usable travel window for precise end-position tuning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX105-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.