Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX110-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10
The AirTAC SAIJ160X110-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 100-110 mm usable travel window for precise end-position tuning.
This configuration omits the FB, CA, CB, and CR mounts, offering a streamlined set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic sensors if a magnet is specified later.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10 Is Used
Press Stroke Tuning
Dial in the exact 100-110 mm end position during machine setup to accommodate material thickness variations without swapping cylinders.
Product Changeover
Quickly adjust the retract stop on a packaging line to handle different carton sizes on the fly.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10 the Right Cylinder?
Choose this adjustable-stroke variant over a fixed SAI when you need to dial in the exact retract distance during commissioning or product changeovers without adding external stops.
Ensure you match the ISO 15552 mounting-interface dimensions, PT port threads, and SUS304 rod material. Because the stroke is 110 mm, side-load is minimal, but always guide the load for long unsupported travels. Note that the rear adjuster acts only as a travel stop to aid deceleration; it does not hold the load without live air. For true load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to trim the nominal 110 mm stroke back by up to 10 mm, creating a 100-110 mm usable travel window. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.