Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX110-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100
The AirTAC SAIJ160X110-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 10 to 110 mm out of its 110 mm nominal stroke, allowing precise end-position tuning without external stops.
This variant uses a SUS304 stainless steel piston rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts strictly as a travel stop to set deceleration, not as a load-holding brake.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100 Is Used
Heavy-Duty Positioning
Dial in the exact 10 to 110 mm travel window during machine commissioning to position heavy assemblies accurately without adding external stopper blocks.
Product Changeover
Quickly adapt the cylinder's end-stop on packaging or handling lines when product sizes change, reducing downtime between production runs.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100 the Right Cylinder?
Choose this 160 mm bore cylinder when you need maximum thrust up to 14074 N at 0.7 MPa, stepping up from a 125 mm bore that provides 8590 N. The adjustable stroke is ideal for machine setup and product changeover, letting you dial in the exact end-stop without swapping the cylinder. For load-holding without live air pressure, this cylinder is insufficient; consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 160 mm bore, 110 mm stroke, 100 mm adjustment, PT G3/4 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is below 300 mm, side-load concerns are minimal, but the 40 mm rod and M36x2 thread handle high bending loads well. Operating speed is 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100 FAQ
It can deliver up to 18095 N at 0.9 MPa.
The rear adjuster allows you to shorten the effective travel from 110 mm down to as little as 10 mm. It acts as a mechanical stop to set the end position, but it does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.