Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX110-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S
The AirTAC SAIJ160X110-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 110 mm stroke that can be dialed back by up to 75 mm, yielding a usable travel window of 35-110 mm for precise end-position tuning at commissioning. Belonging to the 160 mm bore class, it delivers 9425 N of pull force at 0.5 MPa and 14074 N at 0.7 MPa.
This variant uses a SUS304 stainless steel rod (code B) for superior corrosion resistance and includes a magnet (-S) for position sensing with CMSE reed or DMSE electronic solid-state switches. The extruded aluminum barrel includes sensor grooves on both sides. It uses PT tapered G3/4 ports and operates at speeds of 30-500 mm/s.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S Is Used
Variable End-Stop Positioning
Dial in the retract distance from 35 to 110 mm on heavy fixtures, allowing precise end-position tuning without machining new external stopper blocks.
Machine Changeover Setup
Quickly adjust the cylinder's effective stroke during product format changes on a packaging line, using the rear screw to set the new retract depth.
Corrosive Environment Actuation
Leverage the SUS304 stainless steel rod for large-force clamping or lifting tasks in washdown or mildly corrosive industrial environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S the Right Cylinder?
Choose this 160 mm bore when a large bore is required to handle heavy loads, but the exact end-of-stroke position varies by product format. The 75 mm adjustment range allows you to fine-tune the retract distance on the fly without swapping cylinders or adding external stops. If you need load-holding without live air pressure, note that this rear adjuster acts only as a travel stop, not a brake; you would instead select an SAIL or BSAI series cylinder.
For ISO 15552 dimensional interchangeability, match the 160 mm bore, 110 mm nominal stroke, 75 mm adjustment, PT G3/4 port, and the -S magnet. Because the stroke is relatively short for this large bore, side-loading is less of a concern than with longer strokes, but an external guide is still recommended for heavy radial loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 75 mm. With a 110 mm nominal stroke, this creates a usable travel window of 35-110 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air.
At 0.7 MPa, the push force increases to 14074 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX110-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.