Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10
The AirTAC SAIJ160X130-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 130 mm travel by up to 10 mm for a precise 120-130 mm usable window. The extruded aluminum barrel features sensor grooves on both sides, and this specific configuration uses a SUS304 stainless steel rod for superior corrosion resistance.
Instead of relying on fixed stops, the rear adjustment screw lets you fine-tune the retract end position directly during commissioning. This cylinder operates at speeds of 30-500 mm/s and utilizes adjustable air cushions at both ends to decelerate massive loads smoothly. Remember that the rear adjuster functions strictly as a travel stop, not a lock, so it will not hold the load without continuous live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10 Is Used
Heavy Press Tuning
Fine-tune the 120-130 mm travel window during setup to precisely dial in heavy pressing forces without swapping out the entire cylinder.
Product Changeovers
Quickly adjust the retract end-stop by up to 10 mm on automated lines when switching between slightly different product sizes.
Corrosive Positioning
Leverage the SUS304 stainless steel rod for heavy-load positioning tasks in washdown or mildly corrosive manufacturing environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10 the Right Cylinder?
The adjustable 120-130 mm window is perfect for product changeovers where exact end-positioning varies slightly between runs. For load-holding without live air pressure, you must integrate an external pilot-operated check valve or look at the SAIL or BSAI series, as the SAIJ adjuster is only a stop. When replacing an ISO 15552 cylinder, verify the 130 mm stroke, 10 mm adjuster, PT tapered port, and your required mounting style.
Because the stroke is 130 mm, side-load risks are moderate, but the robust 40 mm rod and M36x2 thread provide excellent rigidity. For any application approaching the maximum stroke limits, always ensure external guiding to prevent binding. Mounting options for this series include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 130 mm nominal stroke by up to 10 mm, creating a 120-130 mm usable travel window. It only sets the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.