Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S
The AirTAC SAIJ160X130-100-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a 130 mm nominal stroke and a 100 mm adjustment range, it provides a highly flexible usable travel window of 30 to 130 mm. This specific SKU includes a SUS304 stainless steel rod (code B) for superior corrosion resistance and comes with a built-in magnet for position sensing.
The rear adjuster acts as a mechanical stop to fine-tune the retract end position during commissioning or product changeovers without swapping the cylinder. It is important to note that this adjuster is a travel stop, not a locking device; the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead. The extruded aluminum barrel includes sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE electronic sensors.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S Is Used
Variable End-Stop Positioning
Ideal for press operations requiring precise lower-die positioning, allowing operators to trim the retract stroke anywhere within the 30 to 130 mm window without adding external mechanical stops.
Product Size Changeover
Enables rapid line adjustments for different package heights or material lengths, dialing in the exact 160 mm bore thrust and travel distance during format changeovers.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S the Right Cylinder?
Choose this 160 mm bore cylinder when an application demands high thrust combined with variable end-stop positioning. The adjustable stroke is particularly valuable for machines processing multiple product sizes, allowing operators to dial in the exact travel distance from 30 to 130 mm on the fly. Since the nominal stroke is 130 mm, an external guide is recommended to manage side loads if the rod is subjected to off-center forces.
To match this cylinder as an ISO 15552 replacement, specify the 160 mm bore, 130 mm stroke, 100 mm adjustment range, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations. The M36x2 rod thread and 40 mm rod diameter provide robust connectivity, while the G3/4 port ensures adequate airflow for its 30-500 mm/s operating speed range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S FAQ
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 100 mm. This creates a usable travel window of 30 to 130 mm, allowing you to set the exact end position during commissioning. It functions as a stop and does not lock the load without live air pressure.
At its maximum rated pressure of 1.0 MPa, it can deliver up to 2050 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.