Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S
The AirTAC SAIJ160X130-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 120-130 mm for precise end-position tuning. This variant features a SUS304 stainless steel rod (code B) for superior corrosion resistance and includes a magnet for position sensing.
Unlike fixed-stroke actuators, this model allows you to trim the retract position by up to 10 mm during commissioning without adding external stops. The extruded aluminum barrel incorporates sensor grooves on both sides, and the -S magnet enables seamless integration with AirTAC CMSE reed and DMSE electronic solid-state switches.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S Is Used
Heavy Press Tuning
Dial in the exact 120-130 mm retract end-stop during setup to prevent over-travel when pressing heavy components.
Changeover Adjustment
Quickly trim the stroke by up to 10 mm on product size changeovers without physically swapping the actuator.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S the Right Cylinder?
Remember that the rear adjuster functions strictly as a travel stop and does not hold the load without live air; for true load-holding, consider an AirTAC SAIL or BSAI cylinder.
To replace an existing ISO 15552 cylinder, match the 160 mm bore, 130 mm nominal stroke, 10 mm adjustment range, PT tapered port threads, and the -S magnet requirement. Although the stroke is 130 mm, always ensure adequate external guiding to manage side loads, as even the robust 40 mm rod cannot support high lateral forces unsupported. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S FAQ
At the maximum operating pressure of 1.0 MPa, the push force reaches 18095 N.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke from 130 mm down to 120 mm. It only sets the travel end and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.