Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30
The AirTAC SAIJ160X130-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust performance for heavy-duty pneumatics. Because of the 30 mm adjustment code, this model provides a usable travel window of 100 to 130 mm, allowing you to dial in the exact retract end-position without swapping out the physical unit.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors, though this specific configuration ships without a piston magnet. The rear adjuster acts strictly as a mechanical stop to fine-tune the travel end during commissioning or product changeovers. It is not a locking mechanism, so live air pressure is required to hold the load securely in place.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30 Is Used
Machine Setup Tuning
Dial in the 100-130 mm travel window during initial commissioning to perfectly align heavy clamping forces without machining external stop blocks.
Product Changeover
Quickly adjust the retract end-position on a packaging line when switching product sizes, using the rear screw to adapt the stroke on the fly.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30 the Right Cylinder?
Choose this 160 mm bore adjustable-stroke cylinder when your application demands high thrust and precise end-position tuning at setup, rather than the fixed travel of a standard SAI model. For holding loads without continuous air pressure, consider an external pilot-operated check valve or the AirTAC SAIL or BSAI locking cylinder series, as the SAIJ adjuster only restricts travel.
When replacing an ISO 15552 cylinder, match the 160 mm bore, 130 mm nominal stroke, 30 mm adjustment range, PT port thread, and your required mounting accessory from the SAIJ supported set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. The 40 mm piston rod and M36x2 thread provide excellent rigidity, but for any stroke at or above 300 mm, always guide the load externally to prevent rod side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30 FAQ
The maximum thrust is 10053 N at 0.5 MPa.
The rear adjuster screw allows you to mechanically shorten the nominal 130 mm stroke by up to 30 mm, providing a usable travel window of 100 to 130 mm. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.