Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S
The AirTAC SAIJ160X130-30-S is a double-acting ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. It provides a usable travel window of 100-130 mm, enabling precise end-position tuning at commissioning without external stops.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features an integrated magnet compatible with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster acts purely as a travel stop, meaning it cannot hold a load without continuous live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S Is Used
Heavy Press Tuning
Dial in the exact 100-130 mm end-stop for heavy pressing operations, compensating for tooling wear without changing the cylinder.
Product Changeover
Quickly adjust the retract position by up to 30 mm when switching between different product sizes on a high-force assembly line.
Corrosive Positioning
Leverage the SUS304 stainless steel rod for heavy load positioning in washdown or mildly corrosive manufacturing environments.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S the Right Cylinder?
The 30 mm adjustment range is ideal for product changeovers on a line, allowing you to fine-tune the retract distance rather than swapping a fixed-stroke SAI cylinder. Because the 130 mm stroke is below the 300 mm threshold, side-load risks are moderate, but external guides are still recommended for heavy lateral loads.
For true load-holding without live air, this cylinder's rear stopper and air cushions are insufficient; you should specify a SAIL pneumatic lock, a BSAI clamp-lock, or an external pilot-operated check valve. To match this ISO 15552 footprint, use a 160 mm bore, 130 mm stroke, 30 mm adjustment, PT G3/4 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S FAQ
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from 130 mm down to 100 mm. It only decelerates and sets the end position; it does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.