Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX130-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 130mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke130 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75
The AirTAC SAIJ160X130-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 130 mm stroke back by up to 75 mm. This yields a usable travel window of 55-130 mm, enabling precise end-position tuning at commissioning without swapping out the barrel or adding external stops. It delivers substantial thrust, pushing with 10053 N and pulling with 9425 N at 0.5 MPa.
Built with a SUS304 stainless steel rod (option B) and PT tapered port threads, this 160 mm bore unit is designed for demanding environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the rear adjuster acts purely as a travel stop to set the retract position; it does not lock or hold the load without continuous live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75 Is Used
Variable End-Position Stops
Dial in the retract stroke from 130 mm down to 55 mm to accommodate different material thicknesses or tooling offsets without changing the cylinder.
Machine Changeover Setup
Use the 75 mm adjustment range to quickly reconfigure end-of-stroke positions during product line transitions, minimizing downtime.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75 the Right Cylinder?
Choose this adjustable SAIJ over a fixed-stroke SAI when you need on-the-fly fine-tuning of the retract end position. To match this ISO 15552 cylinder for a replacement, verify the 160 mm bore, 130 mm stroke, 75 mm adjustment, PT G3/4 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. No magnet is specified for sensors on this unit. For any load-holding requirements without live air, a standard SAIJ is insufficient; consider an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI series cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75 FAQ
At the maximum pressure of 1.0 MPa, the push force reaches 18095 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 130 mm stroke by up to 75 mm, creating a usable stroke window of 55 to 130 mm. The adjuster is a mechanical stop for end-position tuning and does not function as a lock to hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX130-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.