Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX140-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 140mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke140 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S
The AirTAC SAIJ160X140-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling precise end-position tuning during commissioning. The rear screw provides a 130-140 mm usable travel window, allowing you to trim up to 10 mm without external stops.
This unit features a SUS304 stainless steel rod for superior corrosion resistance and includes a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S Is Used
Press Tonnage Tuning
Dial in the exact 130-140 mm end position during heavy press setup to accommodate varying material thicknesses without changing tooling.
Automated Line Changeover
Quickly adjust the retract stop for new product sizes on a high-force assembly line, saving downtime on physical cylinder swaps.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S the Right Cylinder?
The adjustable 130-140 mm travel window is ideal for product changeovers, letting you fine-tune the retract end-stop on the fly instead of physically swapping a fixed-stroke SAI cylinder.
For load-holding without continuous air pressure, note that this cylinder's rear adjuster acts only as a travel stop, not a brake. You will need an external rod lock, a pilot-operated check valve, or a related AirTAC type like the SAIL or BSAI clamp-lock. Ensure your ISO 15552 replacement matches the PT port, 40 mm rod, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S FAQ
It reaches a maximum thrust of 2050 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 140 mm nominal stroke by up to 10 mm, creating a 130-140 mm usable travel window. It decelerates the travel end but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX140-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.