Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX15-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 15mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke15 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S
The AirTAC SAIJ160X15-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated SUS304 stainless steel rod is ideal for corrosive environments, and the built-in magnet supports CMSE reed and DMSE electronic sensors for precise position feedback.
With a nominal 15 mm stroke and a 10 mm adjustment range, this SKU provides a highly configurable 5-15 mm usable travel window. The rear adjuster acts purely as a mechanical stop to fine-tune the end position during commissioning; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S Is Used
Product Changeovers
The 10 mm rear adjustment screw allows operators to dial in the exact end-position for varying product thicknesses on the same line without changing tooling.
Corrosive Environments
Equipped with a SUS304 stainless steel rod, this cylinder is suited for packaging machinery or chemical processing where moisture resistance is critical.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S the Right Cylinder?
Choose this 160 mm bore cylinder when an application demands extreme force within a very short, variable travel distance. The adjustable end-stop is perfect for product changeovers, eliminating the need to swap cylinders or bolt on external stops.
This configuration includes a PT tapered port, a 40 mm rod diameter with an M36x2 thread, and a -S magnet. It shares the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Because the stroke is only 15 mm, external side-load guides are unnecessary, but the 50 mm cushion length ensures smooth deceleration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S FAQ
At the maximum 1.0 MPa pressure, it delivers 2050 kgf.
The rear mechanical stopper allows you to trim the effective stroke by up to 10 mm. This creates a usable travel window between 5 mm and 15 mm, enabling precise end-position tuning at commissioning without adding external stops.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX15-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.