Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX150-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S
It features a SUS304 stainless steel rod and a PT tapered port thread. The built-in magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors.
With a 150 mm nominal stroke and a 10 mm adjustment range, this model provides a usable travel window of 140 to 150 mm. This allows you to fine-tune the retract end position during commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the adjustable air cushions at both ends help manage the kinetic energy of heavy loads.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S Is Used
Press Stroke Calibration
Dial in the exact 140 to 150 mm end-stop during initial machine commissioning to accommodate material thickness variations without external shims.
Product Size Changeover
Quickly adjust the retract position on a packaging line when switching between different product sizes, leveraging the 10 mm trim window.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S the Right Cylinder?
The adjustable stroke is ideal for machine setups requiring exact end-position tuning during product changeovers. Because the stroke is 150 mm, the robust 40 mm rod handles side loads well, though any long unsupported travel still requires an external guide.
For an exact ISO 15552 replacement match, specify a 160 mm bore, 150 mm stroke, 10 mm adjustment, PT ports, and the -S magnet. Remember that the rear adjuster acts only as a travel stop and the air cushions handle deceleration; neither will hold a load without live air pressure. For true load-holding, consider the SAIL or BSAI series. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, creating a 140 to 150 mm usable travel window. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.