Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX160-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S
The AirTAC SAIJ160X160-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 160 mm stroke by up to 100 mm. This creates a highly flexible 60-160 mm usable travel window for precise end-position tuning at commissioning.
This specific configuration features a SUS304 stainless steel piston rod for superior corrosion resistance and includes a magnet for position sensing with CMSE reed and DMSE electronic switches. The extruded aluminum barrel retains standard ISO 15552 mounting dimensions, while the rear adjuster acts purely as a travel stop and does not lock the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S Is Used
Variable End-Stop Setup
Fine-tune the 60-160 mm travel window during machine commissioning without swapping cylinders or adding external mechanical stops.
Product Size Changeover
Quickly adjust the retract position on automated lines processing varying product dimensions, using the 100 mm trim range.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S the Right Cylinder?
Choose this 160 mm bore cylinder when an application demands high force combined with variable end-stops for frequent product-size changeovers, rather than relying on a fixed-stroke SAI cylinder. For even higher force, the 200 mm bore provides 21991 N at 0.7 MPa. To match this exact ISO 15552 replacement, specify a 160 mm bore, 160 mm stroke, 100 mm adjustment, PT tapered ports, the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and a magnet (-S).
Because this model features a 160 mm stroke, it does not require external side-load guides, but remember the rear adjuster only sets the travel end. For load-holding without live air pressure, select a SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S FAQ
At 0.9 MPa, the push force increases to 18095 N.
The rear external adjuster screw allows you to shorten the effective travel from the nominal 160 mm down to 60 mm. This provides a 60-160 mm usable window for precise end-position tuning without changing the cylinder's ISO 15552 mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.