Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX160-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S
The AirTAC SAIJ160X160-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 130 to 160 mm. The integrated magnet supports position sensing via CMSE reed or DMSE electronic switches.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop for deceleration, not a load-holding lock, while the extruded aluminum barrel maintains standard ISO 15552 mounting dimensions.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S Is Used
Heavy Press Tuning
Dial in the exact 130 to 160 mm end-stop for heavy pressing operations without machining new hard stops.
Product Changeover
Quickly adjust the stroke length on a conveyor divert when handling different sized pallets or packages.
Machine Setup
Fine-tune the retract position during initial machine commissioning to perfectly time high-force operations.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S the Right Cylinder?
The 30 mm adjustment range is ideal for fine-tuning the end-stop during product changeovers. For load-holding without live air pressure, a plain SAIJ is insufficient; consider an AirTAC SAIL or BSAI locking cylinder instead.
To replace an ISO 15552 cylinder, match the 160 mm bore, 160 mm nominal stroke, 30 mm adjustment code, PT port thread, and the -S magnet requirement. Because the stroke is 160 mm, ensure adequate external guiding to handle side loads, as the 40 mm rod and M36x2 thread handle substantial forces but cannot eliminate leverage on long unsupported travels. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S FAQ
The rear adjuster screw allows you to shorten the effective travel from the 160 mm nominal stroke down to 130 mm. This stopper sets the end position but does not hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX160-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.