Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX165-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 165mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke165 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S
The AirTAC SAIJ160X165-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end-of-travel position during commissioning. The 10 mm adjustment screw provides a usable travel window of 155 to 165 mm, letting you dial in the exact retract distance without adding external mechanical stops.
This specific configuration features a SUS304 stainless steel rod (option B) for superior corrosion resistance and includes a built-in magnet for electronic DMSE or reed CMSE position sensing. The extruded aluminum barrel incorporates sensor grooves on three sides for flexible switch mounting. It uses a PT G3/4 port and operates at speeds between 30 and 500 mm/s.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S Is Used
Changeover Tuning
The 10 mm rear adjuster allows operators to quickly shift the effective stroke from 165 mm down to 155 mm when switching product sizes on a line.
Corrosive Assembly Lines
The SUS304 stainless steel rod withstands washdown environments and harsh factory atmospheres better than standard carbon steel.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S the Right Cylinder?
Choose this 160 mm bore when an 80 mm bore (4523 N at 0.9 MPa) is insufficient for heavy pressing or clamping, but a 200 mm bore (28274 N at 0.9 MPa) would be physical overkill. The adjustable stroke is ideal for product changeovers where the retract distance varies slightly by part size. Unlike a fixed-stroke SAI cylinder, this SAIJ model lets you trim the 165 mm stroke back by up to 10 mm in seconds.
For an exact ISO 15552 replacement match, ensure your specifications align with this SKU: 160 mm bore, 165 mm stroke, 10 mm adjustment range, PT G3/4 threaded ports, and the -S magnet option. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. If your application requires true fail-safe load holding, consider the AirTAC SAIL or BSAI clamp-lock series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S FAQ
The pull force is 9425 N at 0.7 MPa due to the rod displacement.
A rear stopper screw lets you shorten the nominal 165 mm stroke by up to 10 mm, creating a 155 to 165 mm travel window. It sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX165-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.