Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX170-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 170mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke170 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10
The AirTAC SAIJ160X170-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position during commissioning. It provides a usable travel window of 160 to 170 mm, letting you dial back the nominal 170 mm stroke by up to 10 mm without adding external stops.
This specific configuration features a SUS304 stainless steel rod for superior corrosion resistance and utilizes PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and while this unit lacks a magnet, the grooves remain ready for CMSE reed or DMSE electronic switches if you later require position feedback.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10 Is Used
Heavy Press Tuning
Dial in the exact 160 to 170 mm end-stop position during machine commissioning to accommodate material thickness variations without swapping cylinders.
Product Changeover
Quickly adjust the rear stopper by up to 10 mm on a packaging line to handle slightly different product sizes while maintaining high thrust.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10 the Right Cylinder?
The 10 mm adjustment range is ideal for applications requiring precise end-position tuning during product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. Remember that the rear adjuster functions strictly as a travel stop, not a lock; the cylinder cannot hold a load without live air pressure, so consider an AirTAC SAIL or BSAI for positive load-holding requirements.
For an exact ISO 15552 replacement match, verify the 160 mm bore, 170 mm stroke, 10 mm adjustment range, PT port thread, and your preferred mounting option from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set. Because the stroke is 170 mm, side loads are generally manageable, but always ensure adequate external guiding for heavy loads to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10 FAQ
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 170 mm down to a minimum of 160 mm. It only sets the end position and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.