Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX170-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 170mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke170 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S
The AirTAC SAIJ160X170-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust thrust for heavy-duty tasks. The integrated magnet supports position sensing via CMSE reed or DMSE electronic switches.
This model provides a 160 to 170 mm usable travel window, allowing precise end-position tuning without external stops. It utilizes PT tapered ports and includes adjustable air cushions at both ends to manage kinetic energy. The extruded aluminum barrel maintains standard ISO 15552 mounting dimensions while omitting the FB, CA, CB, and CR bracket options.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S Is Used
Heavy Press Tuning
Dial in the exact 160-170 mm end-stop during heavy press commissioning to perfect the crimping depth without machining new spacers.
Product Changeover
Quickly adjust the retract position on a conveyor diverter when switching to different pallet sizes, saving setup time.
Corrosive Assembly
Leverage the SUS304 rod and 10053N pull force at 0.5 MPa to execute powerful clamping in humid or washdown assembly cells.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S the Right Cylinder?
The 10 mm adjustment window is ideal for fine-tuning the retract end during product changeovers rather than swapping a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop, not a lock; for load-holding without live air, consider an external rod lock or the SAIL series.
To achieve a true ISO 15552 replacement match, verify the 160 mm bore, 170 mm stroke, 10 mm adjustment, PT port thread, and the -S magnet requirement. Because the stroke is 170 mm, ensure adequate external guiding to handle side loads, as even the robust 40 mm SUS304 rod can deflect under high off-center stresses.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S FAQ
At the maximum operating pressure of 1.0 MPa, it achieves up to 2050 kgf of push force.
The rear adjuster screw lets you shorten the nominal 170 mm stroke by up to 10 mm, creating a 160-170 mm travel window. It acts as a physical stop to fine-tune the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX170-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.