Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX180-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 180mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke180 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10
The AirTAC SAIJ160X180-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 170-180mm usable travel window. Delivering massive thrust up to 18095N at 0.9 MPa, it handles heavy industrial loads with precision. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This specific configuration uses a SUS304 stainless steel rod for superior corrosion resistance and includes PT tapered G3/4 ports. The rear adjuster acts purely as a mechanical stop to fine-tune the end position during commissioning without needing external shims. It is not a locking device, so load-holding without live air requires a SAIL or BSAI cylinder.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10 Is Used
Heavy Press Fine-Tuning
Dial in the exact end-of-stroke position on heavy pressing operations without adding external mechanical shims during tooling changes.
Product Size Changeover
Adjust the 10mm travel window quickly on automated lines when switching between product variants that require slightly different retraction points.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10 the Right Cylinder?
Choose this 160mm bore when you need higher force than the 125mm option (11045N at 0.9 MPa) but want to avoid stepping up to the 200mm class. The 10mm adjustment range is ideal for dialing in exact end-stops during machine setup or product changeover, preventing the need to swap out a fixed-stroke SAI cylinder. Because it uses a PT tapered G3/4 port and omits FB, CA, CB, and CR mounts, you must ensure your manifold and bracketry match the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces. For any application approaching the 180mm stroke, external guides are recommended to manage side loads on the 40mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10 FAQ
The maximum operating pressure is 1.0 MPa.
The rear adjuster screw allows you to shorten the nominal 180mm stroke by up to 10mm, providing a usable travel window of 170-180mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX180-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.