Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX195-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S
The AirTAC SAIJ160X195-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel window from 95 to 195 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet (-S) enables precise positioning feedback when paired with AirTAC CMSE reed or DMSE electronic solid-state switches.
This 160 mm bore model operates at speeds between 30 and 500 mm/s and uses PT tapered G3/4 ports. The rear adjustment screw acts purely as a mechanical stop to dial in the end position without adding external stops, but it does not hold the load without live air pressure. For load-holding requirements without continuous air supply, consider the SAIL or BSAI series instead.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S Is Used
Heavy Press Tuning
Dial in the exact 95-195 mm travel window during heavy press setup, allowing precise end-position tuning without swapping out the entire cylinder.
Product Size Changeover
Adapt quickly to varying product sizes on a packaging line by adjusting the rear stopper up to 100 mm, eliminating the need for external mechanical stops.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S the Right Cylinder?
Select this adjustable-stroke model when an application requires exact end-position tuning on a 195 mm nominal stroke, offering a 100 mm adjustment window to accommodate product changeovers. Because the 195 mm stroke is below the 300 mm side-load threshold, you can rely on the 40 mm cushion length and the sturdy 40 mm rod to manage standard loads without an external guide.
As a dimensionally interchangeable ISO 15552 cylinder, it supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. It is not a direct replacement for tie-rod cylinders utilizing FB, CA, CB, or CR mounts. When ordering, confirm the bore 160, 195 mm stroke, 100 mm adjustment, PT G3/4 port, SUS304 rod, and the -S magnet configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S FAQ
The maximum push force at 1.0 MPa is 10053 N.
The rear adjuster screw lets you shorten the 195 mm nominal stroke by up to 100 mm, creating a usable travel window of 95 to 195 mm. This mechanical stop fine-tunes the end position but does not lock or hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.