Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX195-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S
The AirTAC SAIJ160X195-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the retract end-position by up to 10 mm. This yields a usable travel window of 185-195 mm, ideal for dialing in exact stopping points during commissioning without adding external stops.
The extruded aluminum barrel features sensor grooves on both sides, and the included magnet (-S) supports CMSE reed and DMSE electronic solid-state switches for precise position feedback. It utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends to decelerate the 40 mm rod. Remember that this adjuster acts purely as a travel stop, not a lock, so it will not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S Is Used
Heavy Press Fit Tuning
Dial in the exact 185-195 mm retraction depth for heavy press-fit assemblies, ensuring precise engagement without physically swapping cylinders between product batches.
Machine Changeover Setup
Quickly adjust the rear stopper by up to 10 mm during production line changeovers to accommodate slightly different component heights, minimizing downtime.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S the Right Cylinder?
The 10 mm adjustable window is highly valuable for machine setups requiring variable end-stops or minor product-size changeovers, preventing the need to swap out a fixed-stroke SAI cylinder. To match this ISO 15552 footprint, specify the 160 mm bore, 195 mm stroke, 10 mm adjustment, PT ports, and the -S magnet.
For any stroke length of 300 mm or more, you must account for side-loading; while the 40 mm rod handles high stress, long unsupported travel still necessitates an external guide. If your application requires true load-holding without continuous air pressure, this cylinder will not suffice—you should look at the SAIL (air-released lock) or BSAI (clamp-lock) variants instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S FAQ
It can deliver up to 2050 kgf at its maximum 1.0 MPa pressure rating.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 10 mm, creating a usable travel window of 185 to 195 mm. It only sets the travel end and provides deceleration alongside the air cushions; it is not a lock and cannot hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.