Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX195-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30
It features a robust 40mm SUS304 stainless steel rod and PT tapered ports. By integrating an external adjusting stopper at the rear, this model allows you to fine-tune the end position at commissioning without swapping out the entire unit.
With a 30mm adjustment code, the usable travel window spans 165 to 195mm. This built-in flexibility is ideal for product changeovers on heavy machinery. The extruded aluminum barrel includes sensor grooves on both sides, and the standard variable air cushions at both ends work alongside the rear stop to control end-of-stroke deceleration.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30 Is Used
Heavy Press Tuning
Dial in the exact 165-195mm end position during heavy press commissioning to accommodate material thickness variations without adding external stops.
Product Changeover
Quickly adjust the stroke length on a packaging conveyor line when switching between different pallet or product sizes on the fly.
Variable End Stops
Use the rear stopper to set precise retraction limits on large material handling doors, ensuring consistent positioning across cycles.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30 the Right Cylinder?
The adjustable 165-195mm travel window is selected over a fixed-stroke SAI cylinder when a machine requires variable end-stops for different product sizes. Because the stroke is 195mm, the 40mm SUS304 rod handles side loads well, though an external guide remains recommended for heavy off-center loads. To replace an ISO 15552 cylinder, match the 160mm bore, 195mm stroke, PT ports, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear adjuster is a travel stop, not a lock; for load-holding without live air, use an external rod lock or a SAIL cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30 FAQ
At 0.5 MPa, the push force is 10053N.
The rear adjusting screw acts as a mechanical stopper, allowing you to trim the nominal 195mm stroke back by up to 30mm. This creates a usable travel window of 165 to 195mm, enabling fine-tuning of the retract position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.