Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX195-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S
The AirTAC SAIJ160X195-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 165 to 195 mm for precise end-position tuning. The integrated magnet supports position sensing via AirTAC CMSE reed and DMSE electronic switches.
This model utilizes PT tapered ports sized at G3/4 and features an extruded aluminum barrel with sensor grooves machined on both sides. The rear stopper mechanism allows operators to dial in the exact retract distance during commissioning without adding external stops, while the adjustable air cushions at both ends manage deceleration across its 30 to 500 mm/s operating speed range.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S Is Used
Product Size Changeovers
Quickly dial in the 165 to 195 mm retract distance when switching between different product lengths on a packaging line, using the rear adjuster instead of swapping hardware.
Adjustable Material Stops
Act as a variable end-stop in automated material handling, utilizing the SUS304 stainless steel rod for durability in environments where corrosion resistance is required.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S the Right Cylinder?
Choose this 160 mm bore cylinder when an application requires substantial thrust, such as the 10053 N pull force at 0.5 MPa, alongside variable end-stop positioning. The adjustable stroke is ideal for product-size changeovers on a line, offering finer control than a fixed-stroke SAI cylinder.
Because the stroke is 195 mm, an external guide is recommended to manage side loads, even with the substantial 40 mm rod diameter and M36x2 thread. Remember that the rear adjuster acts only as a travel stop, not a lock; the SAIJ160X195-30-S will not hold a load without live air, so applications requiring true load-holding without pressure should utilize an external rod lock or a SAIL pneumatic lock cylinder. This profile cylinder is dimensionally interchangeable per ISO 15552 and uses the standard SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S FAQ
At 0.5 MPa, the push force is 10053 N.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 30 mm, creating a usable travel window of 165 to 195 mm. It is a travel stop and does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.