Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX195-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 195mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke195 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75
The AirTAC SAIJ160X195-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 120-195 mm, allowing you to dial back the 195 mm nominal stroke by up to 75 mm during commissioning. In the 160 mm bore class, it delivers a robust 10053 N pull force at 0.5 MPa and reaches a maximum of 2050 kgf at 1.0 MPa.
This configuration features a SUS304 stainless steel rod for superior corrosion resistance and uses a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Operating speed spans 30-500 mm/s, supported by 50 mm variable air cushions at both ends to manage heavy impact loads.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75 Is Used
Heavy Fixture Positioning
Dial in the exact 120-195 mm travel needed for large machining fixtures, using the rear stopper to fine-tune the clamping position without external shims.
Product Size Changeover
Adjust the retract end-position on the fly when switching product sizes on an assembly line, saving downtime by avoiding complete cylinder swaps.
Variable End-Stop Machine Setup
Set precise retract distances during initial machine commissioning to accommodate varying part widths, relying on the 75 mm trim window for exact spacing.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75 the Right Cylinder?
Choose this 160 mm bore when a 125 mm bore (delivering 5734 N pull at 0.5 MPa) lacks the necessary thrust for your heavier fixtures. The 75 mm adjustment range is ideal for product changeovers, letting you set variable end-stops without swapping the cylinder or adding external stops. If your machine requires true load-holding without live air pressure, note that the rear adjuster acts only as a travel stop; you would need a SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
For a direct ISO 15552 replacement match, specify a 160 mm bore, 195 mm stroke, 75 mm adjustment, PT port, and standard mounting from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Because the stroke is under 300 mm, side-load stress on the M36x2 rod thread is manageable without an external guide, though unsupported loads should still be minimized.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75 FAQ
It reaches a maximum thrust of 2050 kgf at 1.0 MPa operating pressure.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 195 mm nominal stroke by up to 75 mm, creating a 120-195 mm usable travel window. It sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX195-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.