Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX200-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30
The AirTAC SAIJ160X200-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to dial back the nominal 200 mm travel by up to 30 mm. This creates a 170-200 mm usable positioning window, allowing precise end-stop tuning during commissioning without adding external stops.
This specific configuration features a SUS304 stainless steel rod (option B) for superior corrosion resistance, a PT tapered port thread, and a robust 40 mm rod diameter with an M36x2 thread. The extruded aluminum barrel includes sensor grooves on both sides, though this unit ships without a magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30 Is Used
Heavy Press Tuning
Fine-tune the 170-200 mm retract distance during machine setup to apply exact clamping force without mechanical shims.
Product Changeovers
Quickly adjust the end-stop by up to 30 mm on a packaging line when switching to a different product size.
Corrosive Assembly
Leverage the SUS304 stainless steel rod for high-thrust positioning tasks in environments requiring washdown resistance.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30 the Right Cylinder?
Choose this 160 mm bore when an 80 mm cylinder (providing 2513 N at 0.5 MPa) lacks the necessary force, but a 200 mm bore is physically oversized. The 30 mm adjustment range is ideal for product changeovers on a line, letting you shift the retract end-position without swapping the cylinder. For fixed-position tasks requiring no end-tuning, a standard SAI cylinder is simpler. Note that the rear screw acts purely as a travel stop, not a lock; the SAIJ cannot hold a load without live air, so for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder.
To replace this cylinder per ISO 15552 interface dimensions, match the 160 mm bore, 200 mm stroke, 30 mm adjustment, PT port thread, and the SUS304 rod material. Because the stroke is 200 mm, side-load stress is moderate, but the large 40 mm rod diameter handles it well; for longer unsupported strokes, always use an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30 FAQ
At 0.7 MPa, the push force increases to 14074 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 200 mm down to 170 mm. It sets the retract end-position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.