Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX200-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 200mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke200 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50
The AirTAC SAIJ160X200-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated adjustment mechanism allows you to dial back the 200mm nominal stroke by up to 50mm, creating a highly flexible 150-200mm usable travel window for precise end-position tuning.
This variant is configured with a SUS304 stainless steel rod (code B) for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of position switches. It operates at speeds of 30-500 mm/s and includes variable air cushions at both ends to manage deceleration, though the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50 Is Used
Product Changeovers
Dial in the 150-200mm travel window during format conversions on packaging lines without physically swapping cylinders.
Commissioning Tuning
Fine-tune the retract end-position during initial machine setup to perfect seating against heavy 14074N loads.
Variable End Stops
Adjust the stroke dynamically on automated assembly equipment to accommodate varying part sizes on the fly.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50 the Right Cylinder?
Select this 160mm bore cylinder when your application requires high pulling force (9425N at 0.5 MPa) alongside variable end-stops for product changeovers. Choose the SAIJ adjustable-stroke series over a fixed SAI cylinder when you need fine end-position tuning at commissioning without swapping the physical cylinder or adding external stops.
For ISO 15552 interchangeability, match the 160mm bore, 200mm stroke, 50mm adjustment, PT ports, and the SUS304 rod material. Note that SAIJ supports a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Because this unit lacks a magnet (-S), it cannot host CMSE or DMSE sensors without modification. If the application requires holding the load safely without live air, use an external pilot-operated check valve or select the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50 FAQ
At 0.9 MPa, the push force increases to 18095N.
The rear adjuster acts as a mechanical stop that lets you shorten the 200mm nominal stroke by up to 50mm, providing a usable travel window of 150-200mm. It sets the end position but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX200-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.