Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30
The AirTAC SAIJ160 Adjustable Cylinder SAIJ160BX210-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 210mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ160 mm
- Stroke210 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30
The AirTAC SAIJ160X210-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 210 mm nominal stroke by up to 30 mm for a precise 180-210 mm usable travel window. Built with an extruded aluminum barrel, it delivers massive thrust, pushing 14074 N at 0.7 MPa and pulling 9425 N at 0.5 MPa.
This unit features a SUS304 stainless steel rod for superior corrosion resistance and is fitted with PT tapered ports. The rear adjustment screw acts purely as a mechanical stop to fine-tune the retract end position during commissioning; it does not lock the load without live air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 9425 N | 9425 N |
| 0.7 MPa | 13195 N | — |
| Max (@1.0 MPa) | 1922 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30 Is Used
Heavy Press Tuning
Dial in the exact 180-210 mm end position during machine commissioning to accommodate varying material thicknesses without adding external stops.
Product Changeover
Rapidly adjust the retract stroke by up to 30 mm on a packaging line when switching to a different pallet or fixture size.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30 the Right Cylinder?
The adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops for quick product changeovers without swapping hardware. Because the nominal stroke is 210 mm, external side-load guides are recommended to protect the 40 mm rod and M36x2 thread from excessive deflection.
For a true ISO 15552 replacement match, verify the 160 mm bore, 210 mm stroke, 30 mm adjustment range, PT port thread, and the required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that this SKU lacks a magnet; adding an -S suffix is required if you need to mount CMSE reed or DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30 FAQ
The rear adjuster acts as a mechanical stop that shortens the 210 mm nominal stroke, creating a 180-210 mm travel window. It sets the end position but does not hold the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160BX210-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.